18620292125
{{ variable.name }}
We are the first one to publish 420°C high temperature nozzle to 3d printer market since year of 2016, now it is the 4th new tech version.
F430 equiped with dual extruders, The left 260°C hotend is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right 420°C hotend is made of martensite steel, which is able to print High performance material like PEEK, ULTEM, etc.
The dual hotend is replaceable, which provide more possibility on your application.
420 ℃ Hotend
Direct Drive
We exclusively research and develop the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.
High Precision
Precision up to: 0.04 mm
Speed up to: 120 mm/s
The whole-steel body not only ensure the stability when printing, but also extend the usage period greatly. Its optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 9 years and more than 30,000 hours.
Metal Chassis
-Fully enclosed chamber can block all external interfernce and reduce noise.
-Hot chamber device provide constant room temperature 70°C,which is able to prevent prints from warping and deform.
Fully Enclosed
Hot Air System
The printer will automatically memorize the current position and save print data.
Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power’s on.
The printer will avoid invalid printing by stoping print and warning when filament runs out.
Outage Restored
Filament Detection
-The printer have all-english-menu touch screen which is easy - -Operate and friendly use. One key to warm,one key to print as well as many other shortcut keys.
Touch Screen
The printer has a heatable glass-ceramic platform and a carbon fiber sheet coverd.
Glass-ceramic have hight thermal efficiency and best low-expansion coefficient, so it don't deform when heating&cooling.
-Carbon fiber sheet is tough and removable. Heat can be deliver efficiently. Most materials can be extruded and sticked to bed very well.
Air Filter System
The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.
Air Filter System
Automatic Leveling Platform
BLtouch smart version use of 25 points, use of 25 points through the probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.
Automatic Leveling
Glass Ceramic
| Printing | |
| Print Technology | Fused Deposition Modeling（FDM） |
| Build Volume | 400*300*300 mm |
| Number of Nozzles | Double |
| Resolution | 0.04 mm |
| Layer Resolution | 0.02 mm |
| Filament Diameter | 1.75 mm |
| Filament Compatibility | PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc. |
| Nozzle Diameter | 0.4mm (0.3 0.5 0.6 0.8 1.0mm) |
| Print File Type | STL, OBJ, AMF, Gcode |
| Speed | |
| Best Printing speed | 55 mm/s |
| Max. Printing speed | 180 mm/s |
| Electrical | |
| Power Requirements | 100V-110V or 200V-240V / 50-60Hz (Depending on your country's default voltage) |
| Max. Power | 1500W |
| Screen | 4.3'' Touch Screen |
| Control Chip | ATmega 2560 |
| Storage Media | U Disk |
| Connectivity | USB |
| Special Function | |
| Outage Restored | Save data when power is off |
| Filament Detection | Pause printing when filament run out |
| Automatic Shut-down | Turn off the power automatically when printing is complete |
| Temperature | |
| Ambient Operating Temperature | 15 ℃~32 ℃ |
| Max. Nozzle Temperature | 420 ℃ |
| Max. Bed Temperature | 140 ℃ |
| Max. Chamber Temperature | 70 ℃ |
| Mechanical | |
| Construction | Power-Coated Steel, Aluminum Casting for Motion Components |
| Build Plate | Glass Ceramic Panel |
| Build Plate Leveling | Automatic |
| Extruder | Directly Drive |
| Stepper Motors | 1.8° Step Angle with 1/16 Micro-stepping |
| X Y Positioning Precision | 12.7 μm |
| Z Positioning Precision | 1.25 μm |
| Software | |
| Software Bundle | CreatWare, Simplify 3D, Cura, Slice 3r, etc |
| Supported File Types | STL,OBJ,AMF |
| Operating Systems | Win7/8/10, MacOS |
| Size & Weight | |
| Product Dimensions & Weight | 620*485*680 mm 48 kg |
| Packing Size & Weight | 750*580*720 mm 62 kg |